Dometic PR4500, Operating Manual

Page: 16 / 180

EN
Operating the awning PR4500
16
6.6 Changing the batteries in the wind sensor
I
➤
Extend the awning if required.
➤
Move the wind sensor (fig.
5
1, page 4) on the inside of the front cover to the
left and take it off.
➤
Release the sensor insert with a screwdriver (fig.
6
A, page 4).
➤
Remove the sensor insert from the housing (fig.
6
B, page 4).
I
➤
Replace the used batteries with new AAA or LR03 (1.5 V) alkaline batteries
(fig.
6
C, page 4). Make sure the polarity is correct.
✓
After correctly inserting the new batteries, the LED ( 1 ) lights up for about 1 second
(fig.
6
D, page 4).
If the LED does not light up, remove the batteries and reinsert them correctly
(fig.
6
C, page 4).
B
Protect the environment!
Do not dispose of any batteries with general household waste.
Return defective or used batteries to your retailer or dispose of them at
collection points.
➤
Test the wind sensor (chapter “Testing the wind sensor” on page 14).
➤
If the wind sensor does not work, reprogramme it (chapter “Reprogramming the
wind sensor” on page 18).
NOTE
When the batteries of the wind sensor are running low, the wind sensor
indicates this with a brief beep tone which is repeated every 5 seconds.
The awning also retracts automatically after 30 minutes, even if it is not
windy.
NOTE
Do not use rechargeable batteries.
PR4500-O-West-South.book Seite 16 Mittwoch, 5. Oktober 2016 1:08 13