Dometic MWO24, Operating Manual

Page: 12 / 176

Warranty MWO24
EN
12
9 Warranty
The statutory warranty period applies. If the product is defective, please contact your retailer or the manufacturer's
branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when you send in the product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Note that self-repair or non-professional repair can have safety consequences and might void the warranty.
F.03 Internal voltage supply default
➤
Press the button for more than 3 seconds to turn off
the microwave oven.
➤
Contact the manufacturer’s branch in your country (see
the back of the instruction manual for the addresses) or
your specialist dealer.
F.04 Low-voltage protection tripped
The display shows the symbol and
ERROR
and the current
voltage is displayed.
You hear 2 signal tones at an interval of one second.
After 10 seconds, the microwave oven switches off.
➤
Check the charge state of the vehicle battery.
➤
If necessary, start the vehicle engine to charge the vehi-
cle battery.
F.05 Overvoltage protection tripped
The display shows the symbol and
ERROR
and the current
voltage is displayed.
You hear 2 signal tones at an interval of one second.
After 10 seconds, the microwave oven switches off.
There is a fault in the 24 V on-board supply.
➤
If necessary, turn off the vehicle engine.
➤
Turn the microwave oven on again.
➤
If the error code is still displayed, then contact your vehi-
cle dealer or a workshop.
F.06 Overheating of the electronics
➤
Press the button for more than 3 seconds to turn off
the microwave oven.
➤
Wait at least 30 minutes before you put the microwave
oven back into operation.
➤
If the error code continues to be displayed, contact the
manufacturer’s branch in your country (see the back of
the instruction manual for the addresses) or your special-
ist dealer.
F.07 Fan fault
➤
Press the button for more than 3 seconds to turn off
the microwave oven.
➤
If the error code continues to be displayed, contact the
manufacturer’s branch in your country (see the back of
the instruction manual for the addresses) or your special-
ist dealer.
F.08 Microwave antenna fault
F.09 Internal communication fault
Error code Fault Explanation/remedy
DometicMWO24_OPM_4445101580_EMEA16_xxxx-xx-xx.book Page 12 Wednesday, July 6, 2022 6:44 PM