EN
Cleaning and maintenance
MCF32, MCF40, MCF60 AC/DC
16
6.10
Defrosting the cooling device
Humidity can form frost in the interior of the cooling device or on the evapora-
tor. This reduces the cooling capacity. Defrost the cooling device in good time
to avoid this.
A
To defrost the cooling device, proceed as follows:
➤
Take out the contents of the cooling device.
➤
If necessary, place them in another cooling device to keep them cool.
➤
Switch off the cooling device.
➤
Leave the lid open.
➤
Wipe off the defrosted water.
6.11
Replacing the fuse
➤
Replace the fuse (8 A 32 V) as shown (fig.
7
Cleaning and maintenance
A
➤
Occasionally clean the device interior and exterior with a damp cloth.
➤
Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
NOTICE! Damage hazard
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
FR34-FR40-FR60_MCF32-MCF40-MRF40-MCF60_OPM_EMEA16.book Seite 16 Donnerstag, 15. Oktober 2020 8:43 08
