Dometic MCK-750-12/N, Operating Manual

Page: 8 / 116

Installing the kettle holder MCK750
EN
8
6 Installing the kettle holder
Observe the following installation instructions:
•
Make sure the installation location provides sufficient stability.
•
Check beforehand that there is sufficient space on the other side for the drill head to come out.
•
Make sure no concealed cables are damaged when drilling or screwing.
•
Make sure the airbag function is not impaired.
To perform the installation, proceed as follows:
➤
Fasten the kettle holder with the screws supplied.
7 Using the kettle
A
7.1 Before initial use
A
➤
Boil water once or twice to clean the water tank.
➤
Pour the boiled water away.
NOTICE!
•
Use the device only when the vehicle is stationary, not while it is moving.
•
Please immediately absorb any escaping fluid. Damage to the electronics may be
caused by moisture entering the device.
•
Danger of scalding!
Empty the water tank carefully.
•
Fill the water tank up to between the minimum and maximum mark (fig.
2
,
page 3).
NOTICE! Risk of damage!
Before connecting the device to the DC power socket, you have to fill the water tank
with water.