Dometic FJX4233EEH, Operating Manual

Page: 17 / 466

Dometic FJX EN
To activate the sleep function proceed as follows:
a) Set the required temperature ( Setting the temperature on page 15).
b) Press the button on the remote control or the button on the control panel.
The symbol appears in the remote control display. The sleep function is activated.
To deactivate the sleep function, press the or the button on the remote control or the button on the
control panel.
The symbol disappears in the remote control display. The sleep function is deactivated.
9.4.9 Activating the I feel function
When this function is active, the remote control measures the room temperature and transmits this measurement to
the roof air conditioner every 10 minutes. The roof air conditioner adapts the target value to this measurement. The I
feel function is only active when the temperature range is b18 °C and +29 °C.
The remote control should not be kept in a part of the room that is considerably warmer or colder than the average
room temperature. It may not, for example, be le in the sun or in front of the roof air conditioner.
When the temperature rises above +29 °C or falls below +18 °C, the I feel function is deactivated. The symbol
flashes three times in the display and then turns off.
1. Press the button.
The I feel function is activated.
The symbol appears in the display.
2. Position the remote control so that it points at the IR receiver on the control panel. Otherwise, the values cannot
be transmitted to the roof air conditioner.
9.4.10 Operating the ambient lights
WARNING! Risk of injury By law it is forbidden to use the external lights when driving the vehicle.
The button on the remote control is active even if the the remote control is switched off.
Only FreshJet FJX4233EEH/FJX4333E(EH)/FJX7333IHP/FJX7337IHP/FJX7457IHP:
To switch the internal lights on or off press the button on the remote control or on the control panel.
The symbol flashes once in the display of the remote control when the internal lights are switched on .
To dim the internal lights proceed as follows:
a) Press the button on the remote control or on the control panel for 3 s.
b) When pressing the button on the remote control: Press the
button to dim the internal light between
50 % and 100 %.
c) When pressing the button on the control panel: The internal light's brightness cycles between 50 % and
100 %. Release the button when the the desired brightness is reached.
Only FreshJet FJX7333IHP/FJX7337IHP/FJX7457IHP:
To switch the external lights on or off press the button on the control panel.
17