EN
Troubleshooting
eStore
26
Status LED flashes
red.
eStore is configured to be con-
nected to multiple eStores and
BUS cables are not plugged in.
➤
Plug in eStore cables.
eStore is over discharged.
➤
Charge eStore.
eStore is over charged
➤
Disconnect chargers from
eStore.
➤
Check the charging voltage of
battery chargers.
eStore ist defective.
➤
Contact an authorised work-
shop.
eStore does not
respond to press-
ing of the main
switch command.
eStore is in storage mode.
➤
Activate eStore.
eStore is over discharged.
➤
Charge eStore with a charging
current of < 10 A.
Note
: Do not use intelligent
charging systems (with main
swtich open, the eStore termi-
nals have no voltage. Some
intelligent battery chargers do
not start if no voltage is present).
➤
Contact an authorised work-
shop.
eStore is configured as slave and
not as master.
➤
Use main switch command on
master eStore (eStore config-
ured #1)
Configuration for connecting
multiple eStores is faulty.
➤
Check the configuration.
eStore is defective.
➤
Contact an authorised work-
shop.
Problem
Cause
Remedy
eStore-IO-16s.book Seite 26 Freitag, 24. Februar 2017 6:29 18
