After Location Has Been Selected
DuraSea Rooftop Installation & Operations Manual
4
L-3075 ENGLISH
Figure 1: Exterior Dimensions and Obstruction-Free Area
•
The roof must be designed to support 130 pounds (59 kg) when the boat is in motion. Normally a 200-pound (90.71 kg)
static load design will meet this requirement.
•
Check inside the boat’s cabin for obstructions to the air distribution box (i.e. space for doors to open, room dividers,
curtains, ceiling fixtures, etc.). See Figure 2.
Figure 2: Interior Dimensions
NOTE:
PROPERTY DAMAGE HAZARD. It is the responsibility of the installer of this system to ensure structural integrity of
the boat roof. Never create a low spot on the roof where water will collect. Standing water around the unit may leak into
the interior causing damage to the product and the boat.
Summary of Contents for DuraSea
Page 20: ......
