EN
Installing and connecting the DC kit
DC-Kit2
16
7.2
Installing components
I
➤
Install the ECL-102 charging current distributor.
➤
Install the PP2002 inverter.
➤
B1600:
Fit remote control RC2 in an easily accessible location in the vehicle.
D
7.3
Connecting the CA2500 Dometic roof air conditioner
➤
Remove the air outlet of the roof air conditioner (
CA2500) (fig.
1
, page 3).
➤
Cut the cable loop of the CA2500 on/off cable through the middle (fig.
2
A,
page 3).
➤
Connect the control cable to the on/off cable (fig.
2
B, page 3).
➤
Lay the control cable of the roof air conditioner to the ECL-102 charging current
distributor.
➤
Cut off round system plug (fig.
2
C, page 3).
➤
Connect both ends of the cable with connections I2 and I3 of the charging
current distributor (
ECL-102) (fig.
3
1 and 2, page 4).
➤
Attach the air outlet of the roof air conditioner (
CA2500) (fig.
1
, page 3).
➤
Run the connection cable of remote control RC1 to the inverter and connect
(
PP2002).
NOTE
DC Kit 2 contains two
different
remote controls for the inverter:
•
CA2500,
B2200, B1600 Plus:
remote control RC1 (is included in
the scope of supply of the inverter)
•
B1600:
remote control RC2
DANGER! Electrocution
Only connect the battery once you have the completed all the
installation work and you are certain it has been done properly.
DC-Kit2--IO-16s.book Seite 16 Dienstag, 21. März 2017 2:15 14
Summary of Contents for DC-Kit2
