EN
Installing and connecting the refrigerator
CRX
14
7.4
Installing the refrigerator
Proceed as follows to install the refrigerator:
➤
If you wish to drain the condensate through a hose:
Mount the outlet port (see chapter “Mounting the water drain outlet (optional)”
on page 13)
➤
Undo the transport lock (chapter “Releasing the lock” on page 22).
➤
Open the refrigerator drawer.
➤
Remove the blanking plugs (fig.
6
).
➤
Push the refrigerator into the recess.
➤
Fix the refrigerator in place using suitable screws (fig.
6
).
➤
Press the blanking plugs (fig.
6
) into the openings.
7.5
Connecting the refrigerator to DC voltage
A
The refrigerator can be operated with a 12 V or a 24 V DC voltage supply.
NOTICE! DANGER OF DAMAGE
•
To avoid voltage drops and loss of performance, keep the
connection cable as short as possible and not be interrupted.
Therefore avoid additional switches, plugs or power strips.
•
Disconnect the cooling device and other electric consumers from
the battery before you connect the battery to a quick charging
device. Overvoltage can damage the electronics of the device.
1.
2.
3.
6
CRX65D-IO-EN.book Seite 14 Freitag, 21. Dezember 2018 9:10 09
