Dometic CRX0050TPRO, Installation And Operating Manual

Page: 17 / 68

EN
CRX50 Pro, CRX65 Pro Installing and connecting the refrigerator
17
Key for fig.
4
, page 5
Observe the following installation dimensions:
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
• Condensate is produced when the refrigerator is operating normally. You can
either wipe up the condensate on the floor of the refrigerator in regular intervals,
or drain it through a water drain outlet in the floor of the refrigerator (see chapter
“Mounting the water drain outlet (optional)” on page 17).
7.2 Mounting the water drain outlet (optional)
➤
Connect a hose with an inside diameter of 10 mm (0.4 inch) (not included) to the
water drain outlet.
➤
Lay the refrigerator on its side in order to access the bottom side.
➤
Mount the water drain outlet (fig.
5
2, page 6) aligned to the front or to the
back according to the desired direction.
➤
Remove the water drain plug (fig.
5
1, page 6) inside the refrigerator.
7.3 Installing the refrigerator
Proceed as follows to install the refrigerator:
➤
If you wish to drain the condensate through a hose:
Mount the water drain port (see chapter “Mounting the water drain outlet
(optional)” on page 17)
➤
Open the refrigerator door.
➤
Remove the blanking plugs (fig.
6
2, page 6).
No. Explanation
1 Exhaust air
2 Cold intake air
3 Condenser
Model Dimensions W x H x D (mm) Dimensions W x H x D (inch)
CRX50 Pro 390 x 541 x 556 15.4 x 21.3 x 21.9
CRX65 Pro 458 x 531 x 571 18.0 x 20.9 x 22.5