EN
Installing and connecting the device
CoolMatic MR07, MRR07, MH07
30
➤
Pull the locking hook (
3
) off the rod.
➤
Remove the locking plate (
4
) and fit it on the opposite side.
➤
Pull the rod downwards and out and put it in the other side.
➤
Fasten the locking hook (
3
) back on the rod.
➤
Detach the top and bottom lock holders (
5
) on the left side.
➤
Detach the top and bottom door hinges (
1
) on the right side.
➤
Fasten the top and bottom door hinges (
1
) to the left side.
➤
Fasten the top and bottom lock holders (
5
) to the left side.
6.5
Connecting the device to a battery
The device is operated with a voltage of 12 V DC:
A
➤
Determine the required cross section of the cable in relation to the cable
length according to fig.
8
, page 6.
Key to fig.
8
, page 6
A
➤
Before starting up the device for the first time, check whether the operat-
ing voltage and the battery voltage match (see type plate).
➤
Connect your device
– as directly as possible to the poles of the battery or
– to a fused socket with at least 15 A.
NOTICE!
To avoid voltage drops and loss of performance, keep the cable
as short as possible and avoid joins.
For this reason avoid additional switches, plugs or multi-way
adapters.
Co-ordinate axis
Meaning
Unit
l
Cable length
m
∅
Cable cross section
mm²
NOTICE!
When connecting the battery, observe the correct polarity.
