EN
CRP40
Using the refrigerator
17
7.5
Connecting to a 230 V mains supply
D
➤
To operate the refrigerator on the 230 V mains, use the MPS-35 rectifier.
8
Using the refrigerator
I
8.1
Saving energy
•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
•
If the cooler has a basket: For optimal energy consumption, position the basket
according to its position on delivery.
•
On a regular basis, make sure the lid seal still fits properly.
•
Defrost your refrigerator as soon as a layer of ice forms.
•
Avoid unnecessarily low temperature settings.
•
Clean dust and dirt from the condenser at regular intervals.
8.2
Using the refrigerator
The refrigerator conserves fresh foodstuffs. The freezer compartment conserves fro-
zen foodstuffs and freezes fresh foodstuffs.
DANGER! Danger of fatal injuries!
•
Never handle plugs and switches with wet hands or if you are stand-
ing on a wet surface.
•
If you are operating your refrigerator on board a boat with a mains
connection of 230 V from the land, you must install a residual current
circuit breaker between the 230 V mains supply and the refrigerator.
Get advice from a qualified specialist.
NOTE
Before starting your new refrigerator for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter “Cleaning and maintenance” on page 20).
Summary of Contents for CoolMatic CRP 40S
