EN
CoolFreeze Operation
11
6.3
Locking the cooling device
➤
Close the lid.
➤
Press the latch (fig.
4
or fig.
5
1, page 4) down, until it latches in
place audibly.
6.4
Connecting the cooling device
The cooler can be operated with 12 V
g
or 24 V
g
or 100 – 240 V
w
.
A
➤
Place the cooler on a firm base.
Make sure that the ventilation slots are not covered and that the heated air can be
dissipated.
Connecting to a battery (vehicle or boat)
A
I
➤
Plug the DC connection cable (fig.
6
2, page 4) into the DC voltage inlet of the
cooler (fig.
3
3, page 3).
➤
Connect the connection cable to the DC power outlet.
NOTICE! Danger of Damage!
•
Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
•
Overvoltage can damage the electronics of the device.
NOTICE!
For protection of the device the DC cable supplied includes a fuse inside
the plug. Do
not
remove the fused DC plug. Only use the DC cable sup-
plied.
NOTE
If you connect the cooler to the DC socket, remember that the ignition
must be turned on to supply it with power.
CF11-16-26-O-16s.book Seite 11 Montag, 17. Dezember 2018 10:44 22
