1. To turn ON the CCC 2 thermostat
when the back light is off, first press
any button to wake up the CCC 2
thermostat. Then press and release
the
ON/OFF
button.
2. Press the
MODE
button to cycle
through the mode options.
A mode is
an operation that can be performed
by the unit and is controlled by
the Dometic CCC thermostat.
The
available modes are:
OFF
,
COOL
,
HP
(HEAT PUMP),
HS
(Heat Strip),
FAN
,
FURN
(Furnace), and
AUTO
.
The available modes are determined
by your system options.
3. Press the
ZONE
button to cycle
through the available zones to be
programmed.
Each zone signifies a
unit designated to cool, heat or de-
humidify a specific area of an RV.
The Dometic CCC 2 thermostat can
control up to four units (zones).
4. Press the
UP
or
DOWN
but-
tons to increase or decrease the room
air temperature (hereinafter referred
to as the set-point).
The set-point
is the desired inside room air tem-
perature.
