5
EN
RTX1000/2000, SPX1200T
Safety instructions
•
Do not operate the parking cooler if the ambient temperature is below 0 °C.
•
Do
not
undo the upper cover of the parking cooler in the event of a fire. Use
approved extinguishing agents instead. Do not use water to extinguish fires.
•
Please inform your vehicle manufacturer if the height entered in your vehicle
documents needs to be altered due to the installation of the parking cooler.
–
RTX1000/2000 height: 197 mm
–
SPX1200T height: 60 mm
•
Disconnect all power supply lines when working on the parking cooler
(cleaning, maintenance, etc).
2.2
Handling electrical cables
•
Use cable ducts to lay cables through walls with sharp edges.
•
Do not lay loose or bent cables next to electrically conductive materials
(metal).
•
Do not pull on the cables.
•
Attach and lay the cables in such a manner that they cannot be tripped over
or damaged.
•
The electrical power supply may only be connected by a specialist work-
shop.
•
The connection to the vehicle's electrical system should be protected as
follows:
–
power supply: 40 A
–
voltage monitor: 2 A
•
Never lay power supply lines (battery leads) in the vicinity of signal or control
cables.
•
Fasten loose cables and plugs by appropriate means (e. g. cable binder) to
avoid rattling.
0$157;63;7,VERRN6HLWH'RQQHUVWDJ0lU]
