Cool Can 10 AC/DC
Technical description
EN
9
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the manufac-
turer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
5
Technical description
The cooling device can cool down goods (thermostatic switch-off at approxi5 °C) or keep them
cool, or warm them up or keep them warm:
Cooling to max. 17 °C below ambient temperature, heating to max. 60 °C
A grid divider can be used to separate foodstuffs, for example, bottles and fruit.
The cooling device is portable and can be carried by a folding carrying handle.
Its cooling system is a non-wearing Peltier cooling system with the heat discharged by a fan.
The cooling device always cools with maximum cooling capacity.
5.1
Description of the device
Connection sockets and control panel (rear of the device):
6
Operation
I
Item in
Designation
1
AC voltage socket
2
DC voltage socket
3
Mode switch
4
LED “HOT” (red): indicates heating mode
5
LED “COLD” (green): indicates cooling mode
6
Voltage selector switch
NOTE
• Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and maintenance” on
page 11).
• A few water drops may form inside the cooler if it has been cooling for
a lengthy period. This is normal because the moisture in the air con-
denses to water when the temperature in the cooler falls. The cooler is
not defective. Wipe it out with a dry cloth if necessary.
CoolCan10_OPM_4445103721_EMEA16_2020-xx-xx.book Page 9 Thursday, April 28, 2022 6:20 PM
