EN
Operation
CFX75DZW, CFX95DZW
20
Latching the cooler lids
➤
Close the lids.
➤
Press the latches (fig.
2
1, page 10) down, until they latch in place audibly.
I
7.6
Setting the temperature
➤
Press the “SET” button (fig.
3
4, page 10):
–
once for the large compartment
–
twice for the small compartment
✓
The display of the respective compartment blinks.
➤
Use the “UP +” (fig.
3
10, page 10) and “DOWN –” (fig.
3
9, page 10)
buttons to select the cooling temperature.
You can adjust the cooling temperature so that each compartment works as a
refrigerator compartment or as a freezer compartment.
✓
The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
I
NOTE – Lid Open Alarm
If the lid is left open for three minutes or more and the device is switched
on, the interior light will flash until the lid is closed.
NOTE
The temperature of each compartment can be set to –22 °C. The
manufacturer however recommends a cooling temperature of –15 °C to
–18 °C for normal usage and optimum energy consumption.
CFX75_95DZW--O-AU.book Seite 20 Dienstag, 3. April 2018 8:49 08
