Dometic 915 series, Installation Instructions Manual

Page: 2 / 7

895(X)0(X)(X).400(X) Power Patio Awning Installation Instructions
SAFETY INSTRUCTIONS
This manual has safety information and instruc-
tions to help users eliminate or reduce the risk
of accidents and injuries.
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see
this symbol in this manual, be alert to the poten-
tial for personal injury.
Follow recommended precautions and safe op-
erating instructions.
UNDERSTAND SIGNAL WORDS
A signal word , WARNING OR CAUTION is used
with the safety-alert symbol. They give the level
of risk for potential injury.
indicates a potentially hazard-
ous situation which, if not avoided, could result
in death or serious injury.
indicates a potentially hazard-
ous situation which, if not avoided, may result in
minor or moderate injury.
used without the safety alert
symbol indicates, a potentially hazardous situa-
tion which, if not avoided, may result in property
damage.
Read and follow all safety information and in-
structions.
2
REQUIRED PARTS:
(Packed with each Hardware Assembly)
895(X)0(X)1.400(X) & 895(X)0(X)2.400(X) Hardware
(4) Mounting Bracket (3310250.000(X))
(8) #14-10 x
1-1/2”
Hex Head Screw (3104499.003)
(2)
.25”
Split Lock Washer (3101746.000)
(8)
3/16”
x
1”
Oscar Rivets (113008)
(2) #6-20 x
.44”
Hex Washer Head Self Drilling Screw
(310359.012)
(2)
1/4”-
20 x
3/4”
Hex Head Bolts (3104176.205)
Important:
Read and understand ALL of the follow-
ing steps before beginning installation.
Application
The A&E Awning is designed and intended for use on Mo-
torhomes, Travel Trailers and Fifth Wheels with straight
sides.
Important:
Structural backing is required where
mounting screws /oscar rivets will be installed through
sidewall for securing top mounting brackets and back
channels.
Important:
Follow the Minimum distance dimensions
requirements from awning rail to door. Mounting height
depends on awning type and length. Insure suffcient
room is available before starting installation. This
awning is not intended to be mounted over a slideout
room.
Hardware Model Minimum Distance
895(X)0(X)1.400(X)
12”
895(X)0(X)2.400(X)
7”
When the door falls in the center of the awning, add
2”
to
these distances.
Installation Height: This is the center to center distance
of mounting holes in the top mounting bracket and the
back channel. See Specifcation chart and illustrations on
page 3.
Dometic, LLC reserves the right to modify appearances
and specifcations without notice.