4
EN
Wiring Diagram
3 .3 Specifications
The following are the technical specifications for the
wireless receiver.
Voltage
12 V
Emission Frequency
433.92 MHz
Maximum Power Load for Motor
180 W
Maximum Power Load for Light
30 W
3 .4 Receiver Control Range
For the awning remote control to communicate with
the wireless receiver, it must be within the specified
transmission distance.
I
Effective transmitting distance may be affected by
actual environment.
q
w
1
Remote Control Transmission Distances
q
Unobstructed
656 ft (200 m)
w
Concrete Obstruction
115 ft (35 m)
4 Wiring Diagram
q
u
y
t
r
e
w
2
Wiring Diagram
q
Power+ (Red)
t
LED+ (Red)
w
Power- (Black)
y
LED- (White)
e
Motor (Brown)
u
Ignition (Orange)
r
Motor (Blue)
5 Installation
Follow the steps in this section to install the wireless
receiver.
I
The receiver shall be installed inside the
recreational vehicle.
1. Determine the receiver location inside the
recreational vehicle and secure the receiver to the
wall or cabinet using the installer supplied screws.
w
q
3
Installing the Receiver
q
Receiver
w
Wiring
2. Route the wiring. Make the electrical connections
according to the “Wiring Diagram” on page 4.
