Press the TIMER buttom to confirm the data entered.
Press TIMER button to set the time when the machine
low, medium or high speed or automatic speed.
fan speed or automatic speed.
machine need to be switched off.
Press the selection button to change the time when the
The machine must be on.
need to be switched off.
Timer off function
The fan speed will keep the low level.
Press the fan speed button to select low, medium or high
expected temperature between 18°C and
Press MODE button to select cold mode then set the
Dehumidification mode
the difference temperature between the set point
and the ambient temperature.
For the automatic speed it wil be set according to
comparing the set temperature with the internal
temperature according to table A.
running mode will be selected automatically by
In this mode the A/C will run automatically and the
Press to switch on the machine.The previous
Operation
B.
A.Remote control
9
Selecting functional status
a.
operating mode that was selected by the remote
control is automatically used.
Press MODE to select mode.
b.
Automatic mode
Cold mode
Ventilation mode
Heat pump mode
TABLE A
30°C.
expected tmeperature between 18°C and
Press MODE button to select this function and set the
30°C.
Press MODE button to select ventilation mode then the
Timer on mode
The machine must be off.
FIG. 15
TURBO
FAN
CLOC
K
MOD
E
°F/℃
SLEEP
TIM
ER
℃
Auto
Turbo
Set point
Clock
Cold mode
Logo
Clock setting
Heat pump
mode
Ventilation
mode
mode
Dehumidification
Fan setting
Change mode
ON/OFF
Turbo fan
mode
Temperature/Hours
sel
selection -
Sleep
Temperature/minutes
°
F
℃
/
speed
Turbo setting
Automatic mode
Time setting
Low fan speed
High fan speed
Auto speed
Middle fan speed
OPERATING INSTRUCTIONS
setting
setting
fan speed or automatic speed.
Press the fan speed button to select low, medium or high
expected temperature between 18°C and
Press MODE button to select heat pump mode then set the
30°C.
Press the TIMER buttom to confirm the data entered.
Press TIMER button to set the time when the machine
machine need to be switched on.
Press the selection button to change the time when the
need to be switched on.
Note: The timer ON and OFF function can only operate
when the hand held remote is in range and able to
communicate with the air conditioner at the set time.
Remote range may vary depending on the installation
environment.
(Reverse cycle where applicable)
(Reverse cycle where applicable)
or
ventilation (A/C model)
Heat pump (HP model)
ventilation (HP model)
Dehumidification (A/C model)
Summary of Contents for 3241CX51R
Page 11: ......
