EN
Using the mains rectifier
CoolPower MPS35
18
The place of installation must be well-ventilated. A ventilation system
which is at least equivalent to the air openings in the device must be pre-
sent for installations in closed housings.
The air intake on the underside or the air outlet on the back of the device
must remain clear.
The installation surface must be level and sufficiently sturdy.
➤
Fasten the mains rectifier with screws through the fastening holes in the
front and the rear of the device (fig.
1
4, page 3).
7
Using the mains rectifier
!
WARNING!
Do not reverse the polarity. If the poles are reversed device may
overheat and be damaged.
A
NOTICE!
Replace defective fuses with new ones of the same rating (15 A
slow-blow).
!
WARNING!
Protect the positive connecting cable to the battery by an external
fuse of 10 A (fig.
2
4, page 3).
Insert the fuse as near as possible to the battery.
➤
Determine the required cross section of the cable in relation to the cable
length according to fig.
3
, page 3.
Key for fig.
3
, page 3
Co-ordinate axis
Meaning
Unit
l
Cable length
m
∅
Cable cross section
mm²
