DOMENA PS4500, Manual

Page: 4 / 24

or things for which the manufacturer cannot be held responsible. In case the
appliance has an earth connection, the electrical safety is ensured only when
the appliance is correctly connected to an efficient earthing installation in
conformity with the existing safety standards. It is necessary to verify this
important safety requirement and in case of doubt, to require an accurate
check-up of the installation by a qualified person. The manufacturer cannot
be held responsible for any damages caused by the lack of an earthing
installation. Ensure that the power of the electrical installation and of the
mains corresponds to the maximum power indicated on the rating plate. In
case of doubt, refer to qualified person.
To avoid dangerous overheating of the appliance, we recommend you to
unroll the electrical cord completely. Do not leave the appliance plugged in
while not in use. Do not obstruct the ventilation/dissipation slots. Keep the
appliance at a reasonable distance from walls, objects, etc. The electrical
cord and plug of this appliance must not be substituted by the user. In case
the electrical cord is damaged or has to be replaced, please contact an
after sales service that is authorized by the distributor.
WARNING! FOR YOUR SAFETY, IF YOU WOULD LIKE TO IRON WITH
STEAM, WE RECOMMEND YOU TO FOLLOW THE INSTRUCTIONS
HERE BELOW:
• it is definitely necessary to wait the boiler switch light to turn off before
ironing, in case it will not turn off, or in case it will remain always turned
off, please switch off the product and refer to an authorized after sales
center.
• a right functioning foresee that the boiler switch light turns off after 20-25
minutes that the product has been switched on. During the steam ironing,
the boiler switch light will turn off and on cyclically which means the
regular creation of steam inside the boiler.
• the low water warning light (5), has to light up only when the water in
the boiler is finished and the iron does not make any steam. In the case
that eventually it will light up during normal steam output, please switch
off the product and refer to an authorized after sales center since this
functioning seems to be anomalous
• in case that during the normal functioning, steam is coming out from the
filling cap (1), please switch off the product and refer to an authorized
after sales center
• please ensure yourself that the iron is placed on a stable surface during
your ironing and also during its resting
• when you are reposing your iron on its iron rest mat, please ensure that
the iron rest mat is located on a stable surface
• the product should not be used if the iron has fallen down, if it leaks, if
there are any other visible damages.