ASB4 manual │ version 1
- 2022
Page:
12 from 14
Frequently asked questions
The heat sink of the PCB is getting hot, is that bad?
No, this will not do any harm. It is also normal for it to heat up. The voltage regulator is responsible
for this and switches itself off at 125 degrees Celsius. As an indication, at 45 degrees the average
person thinks it is too hot to touch.
When I switch on the power supply, the servos twitch.
This is correct and is caused by the servos themselves. This can do no harm.
Afterword
I have written this manual for general use. You do not have to pay for this manual and it can be
downloaded from our website free of charge. If you want to copy the text for your own or club use, please
contact us.
I hope this manual will help you connect the ASB4. If you have any comments, please let me know. I will
then be able to include them in a new version. You can report them by sending an email to
[email protected].
Thank you for reading and using this manual.
Kind regards, Martin
Domburg
