Domaplasma IQ500, User & Installation Manual

Page: 29 / 52

29
For this reason, the Domaplasma ® filter can only be used on cooker hoods in combination
with high quality metal grease filters in the hood, which are equipped with at least 8 layers
wire mesh. If this is not the case, the supplied Hyabsorb ® fine filter must be applied to the
metal grease filters of the cooker hood.
The properly installed Hyabsorb ® filter can, still attached to the grease filters, be cleaned in
the dishwasher at 55 to 60
°
C.
3.4 Installation of Hyabsorb ® filters
1. Take the metal grease filter(s) from the cooker hood before placing the Hyabsorb
®
fine
filters on the grease filter(s). First measure the inside dimensions of each filter (fig. 11).
Note that when measuring each side (length and width), the measurement starts on the
inside of the framework and ends on the outside of the framework (fig. 11).
Fig. 10: Fig. 11: Measuring Fig. 12:
2. Take the supplied Hyabsorb ® filter sleeve, place it on a flat surface and cut out the
measured size.
3. Take the piece of Hyabsorb
®
fine filter and place it onto the grease filter of the cooker
hood (fig. 14).
Fig. 13: Fig. 14: