Semi-automatic programming according to cooking period
This function is used to cook in the desired time range. Place the food to be cooked into the oven. The oven should
be adjusted to the desired cooking function and temperature setting.
The maximum length of cooking period is 10 hours.
1> Press “ “ button until you see “ Dur “ on the timer screen. (Before setting cooking period.)
2> Use “ + ” or “ - “ buttons to adjust cooking period for the food you wish to cook . (Refer to the instructions for
setting the correct time of day.) Press “ “ button to confirm. The day’s time will appear on the screen and the
symbols “ A “ “ “ will light on the screen. The oven will start to operate.
3> At the completion of the set duration, the timer will stop the oven and give an audible warning. The symbol
” A ” will also begin to flash on the screen. After turning both the cooking function and oven temperature knobs to
“0” position, pressing any button for less than 3 seconds will stop the audible warning. Pressing “ “ for more
than 3 seconds will set the oven to Manual mode again to be able to use the oven.
Semi-automatic programming according to finishing time
This function is used to cook according to the desired finishing time. The food to be cooked is put into the oven.
The oven is adjusted to the desired cooking function and temperature setting.
1> Press “ “ button until you see “ End “ on the timer screen. (Before setting finished time).
2> Use “ + ” or “ - “ buttons to adjust the finishing time. (Refer to instructions for setting the correct time of day.)
3> Press “ “ button to confirm. The day’s time will appear on the scren and the symbols “ A “ “ “ will light on
the screen. The oven will start to operate.
4> At the completion of the set duration, the timer will stop the oven and give an audible warning. The symbol
” A ” will also begin to flash on the screen. After turning both the cooking function and oven temperature knobs
to the “0” position, pressing any button for less than 3 seconds will stop the audible warning. Pressing “ “
for more than 3 seconds will set the oven to Manual mode again to be able to use the oven.
Full-automatic programming
This function is used to cook after a certain period of time, with a certain duration. The food to be cooked should
be placed into the oven. The oven is adjusted to the desired cooking function. The oven temperature is adjusted
to the desired temperature depending on the food to be cooked.
First: Press “ “ button until you see “ Dur “ on the timer screen. Use “ + ” or “ - “ buttons to adjust the cooking
period for the food you wish to cook. Press “ “ to confirm. The day’s time will appear on the screen and the
symbol “ A ” will begin to continuously light on the screen.
Second: Keep pressing on “ “ button until you see “ End ” on the timer screen. When you see “ End ” on the
timer screen, use “ + “ or “ - “ buttons to adjust the finishing time. Press “ “ button to confirm. The day’s time
will appear on the screen and the symbol “ A ” will begin to continuously light on the screen. The symbol “ “
will disappear until the time cooking starts.
You can set a time which can be up 23 hours and 59 minutes after the time obtained by adding the
cooking period to the day’s time.
The oven will start operating at the time calculated by deducting the cooking period from the set finishing time,
and will stop at the set finishing time. The timer will give an audible warning and the symbol “ A ” will begin to
flash. After turning both the cooking function and oven temperature knobs to the “ 0 ” position. Pressing any
button for less than 3 seconds will stop the audible warning.
Pressing “ “ for more than 3 seconds will set the oven to Manual mode again to be able to use the oven.
Note: Once setting full-automatic mode times cannot be changed. Changing time means canceling automatic
progamming and entering into the corresponding mode. If you need to reset the automatic mode you will need
to stop setting the current mode and to set the automatic mode according to the above steps again.
7
