MXS924 Users Guide
–
Dolphin Interconnect Solutions
Page 19
Change configuration
This section allows you to change the active configuration of the PCIe switch. The section works like a filter for the
available configurations.
Start by selecting a «Group»
(Standard, Custom, …), then
«Type» (NTB, Transparent, Uploaded, …), and eventually the
configuration. You can then press [Change configuration] where you will be met with a warning message; « Changing the
config will reset the PCIe switch, halting all traffic, and should not be done in a production environment. You must NOT
turn off the switch or leave this page during the burn operation. Are you sure you want to continue?». Pressing [OK]
initiates an erase, write and verification step, all with individual progress bars.
Upload configuration
Additional configurations and special customizations may be provided by Dolphin.
