4
Functions Table
IMPORTANT NOTE:
The keypad output is factory default set at 4 bit burst output.
Upon request, it can be changed, by Transmitter Solutions,
to 10 bit or 8 bit burst output.
Keypad Transmission Format
The keypad will transmit the PIN data when it receives the
key after PIN code.
Facility Code is always “000”.
The PIN code will always be the Wiegand serial number (a 1 to
5 digit number). Numbers eligible are 1 - 65535.
Read Card
The LED light will turn Green, and the
buzzer will beep, the reader outputs the
Wiegand signal
External LED Control
When the input voltage for the LED is
low, the LED will turn Green
External Buzzer Control
When the input voltage for the Buzzer is
low, the Buzzer will sound
Wiegand Data Output
Wiegand 26~37 bits range available for
DOLXMWIHIDEM reader, factory default
setting is Wiegand 26 bits, HID® card
can output Wiegand 26~37 automatically,
EM and Mifare cards are forced to output
based on the reader setting.
#
Summary of Contents for DOLXMWIHIDEM
Page 2: ......