3
• The transmitter module built into the DOLGDO318LIPW4 is a 4-channel, rolling
code transmitter.
• As each transmitter has a unique serial number, no further action by the user is
required outside of programming the receiver to recognize the rolling code signal.
• Refer to your receiver’s instruction for how to program the keypad signal into
your receiver.
• When the receiver instructions indicate the need to press the transmitter button,
you will need to enter your PIN into the keypad to initiate a transmission.
PROGRAMMING THE DOLGDO318LIPW4
Default PIN: 1 2 3 4
Changing the PIN
LED Guide:
Indicator LED:
ON
Entered into change access code mode
BLINK Code entered incorrectly
Keypad LED:
BLINK Access Code correct
Accessing a
specific channel
#, #, PIN: 1 2 3 4, New PIN: __ __ __ __ , #
#, PIN: __ __ __ __, Channel:1-4
Use this sequence when accessing a different
channel is desired for multi-channel receivers.
Example:
#, 5 5 5 5, 2 accesses channel 2
#, 5 5 5 5, 3 accesses channel 3
#, 5 5 5 5, 4 accesses channel 4
(Note: To reset the access code remove 9 volt battery form unit, Depress any key on
the keypad and wait 10 seconds before installing battery.)
