User Manual of DOLCWIUHFP
11
3.2.1.2 Installation for Tags
For the vehicles without metalized windshield, you can choose one of six places showed on
the
figure 3.2.1-1 to
install
For the vehicles with the pre-configured metalized windshield, it should have a reserved area
with 120(L) * 70(W) mm that not metalized for RFID tags according to the European Standard,
usually in the place B, so you can install the tag on this reserved area.
For the vehicles with the after-sale metalized windshield, you can choose one of six places
showed on figure 3.2.1-1 to cut off the metallic coat with a 120(L) * 70(W) mm area
For optimum performance, choose the placement A or E if the antenna of the reader in the left
position of the windshield; choose the placement C or D if the antenna in the right position of the
windshield; while choose placement B or F if the antenna in the overhead of the traffic lane.
Figure 3.2.1-1
3.2.1.3 Installation for card
The card is designed to install on the front of the driver platform, the base of the
card can be adjusted to make sure the front surface of the tag is face to the front surface
of the reader.
Remark: When there is a metalized windshield, the read range of the reader will be affected.
Please test the performance before installation
3.2.1.4 Holding the card by hand
Choose the correct way with ticket #
!
$ for holding card. For details, please see figure
3.2.1.4-1
Figure 3.2.1.4-1
