6
|
Dolphin Blue
|
DB
1900
Series
INSTALLATION STEPS
4 . C O N N E C T S I G N A L C A B L E
Connect the signal cable with the control box.
Screw tightly.
Note
: Keep this cable dry and clean to ensure you
do not have any faults.
I N S T A L L I N G T H E C O N T R O L B O X
Mount the control box onto the wall, using screws
and plugs.
Note:
1. Turn off the water and power supply
before installation.
2. Be sure to install the control box correctly.
3. For easy maintenance, choose a suitable
place to install the control box. It must be
less than 500mm from the basin. (Please check the picture opposite).
4. Ensure the tap spout when installed is 300mm from the surface beneath to
ensure sensor has room to work.
To adjust the sensor range, press the red button on the control box while
placing a hand beneath the sensor at the desired activation height.
820
550
650
