Dolphin BC2201SS Manual Download Page 3

Operating Instructions and Parts Manual 

Hand Dryer

Surface-mounted hand dryer 

2

General safety information

Installation

1. Make sure power supply breaker is switched off. Installation must be carried out in accordance 
    with the current edition of the local wiring regulations code having jurisdiction. Installation should 
    be performed only by a qualified electrician.
2. Place template against wall at desired height (see mounting height recommendations) and mark 
    locations of 4 mounting holes and wire service entry at knockout (KO) location.
    

Note: 

For two or more dryers,  dryers should be no closer than 24 inches (610 mm) on center.  

3. Remove and retain 2 cover screws and cover.
4. Connect supply wires to terminal block where indicated and connect ground wire to base plate 
    with ground screw.
 
    A. Connect the live wire (colored black, brown or dark) to  the terminal block marked "L".
    B. Connect the neutral wire (colored white, blue or light) to the terminal block marked "N".
    C. Connect the ground wire (colored green or green and yellow) to the terminal block marked "    ".
    

Note

 that colors of live and neutral wires depend on voltage of supply service.  

5. Replace cover. Do not over-tighten screws. 

 

 

Connections:

                                Disconnect power at 
the service breaker before installing or 
servicing. Full pole disconnection device
must be incorporated in the fixed wiring

                                

                                This product is 
intended for installation by a qualified 
service person. Use 1.2 mm² 
solid conductor for wiring.

                                All units must be 
supplied with a 3-wire service. The 
ground wire must be connected to the 
dryer's backplate. 

                                Failure to properly 
ground unit could result in severe 
electrical shock and/or death.

Type Y attachment

If the power supply cord is damaged, it must be replaced by the manufacturer 
or its service agent or a qualified person in order to avoid a hazard. D

isconnect 

the fixed 

wiring only in accordance with the wiring rules.

 

 

This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.    

Children should be supervised to ensure that they do not play with the appliance.

N

OTE: We do not recommend installing this dryer above a basin. If you are installing

              this dryer above a basin, please make sure that reflection won’t occur.  

in accordance with the wiring rules.  

Reviews: