MAINS CABLE
CONNECTIONS AS
FOLLOWS:
›
Red or Brown wire to Live terminal marked “L”.
›
Black or Blue to Neutral terminal marked “N”.
›
Green or Yellow and Green to Earth terminal marked “ ”
or to the green screw marked “ ”.
›
Bare grounding earth wires should be sleeved with green and
yellow tubing. Colours of live and neutral wires depend on
voltage of supply service and requirements of Building and
Electrical Code having jurisdiction.
Service Tool included
Security hex driver 4mm (5/32” pin-hex
will work if tool is lost).
RECOMMENDED
MOUNTING HEIGHTS
From top edge of dryer aperture to finished floor level
› Men
1270
› Women
1195
› Children 4-7 years
890
› Children 8-10 years
990
› Children 11-13 years
1090
› Children 14-16 years
1195
› Handicapped 1015
OPERATION
›
Shake excess water from hands
›
To activate dryer place hands in dryer bowl and repeatedly
turn hands over until dry. Heater has built in safety thermal
cut off. Sensor has 1 second inactivity cut off.
CARE AND MAINTENANCE
Periodic cleaning of the unit is recommended to ensure
optimum performance.
›
Clean with soap and warm water, dry with a clean soft cloth.
›
To maintain finish of stainless steel parts use any industrial
steel cleaner, polishing along the material grain with a clean
soft cloth.
›
Internal cleaning;
Disconnect the electrical supply.
›
Remove the two cover mounting screws
›
Remove the cover
›
Clean all dust/lint from the interior of the dryer.
›
Replace the cover. Do not over tighten the screws.
›
Never Use Corrosives - such as bleach or other cleaning
products containing hypochlorite;
›
Any form of acid solution or industrial cleaning solution;
Bathroom cleaning products, developer liquids, concentrated
disinfectants, strong alkalis or caustic soda;
›
Never Use Abrasives – such as wire wool; scouring pads;
›
Caution – Never use dirty or grit contaminated cleaning
sponges or cloths
!
!
4
02.4011 User Manual
www.dolphinsolutions.co.uk
