Dolmar TM-98.14 H2D, Operator'S Manual

Page: 124 / 252

EN 26 HOW TO USE THE MACHINE
the engine by putting the key into the «OFF» position.
When the engine is stopped, close the fuel stopcock
(1)
( if fitted) .
To avoid backfire, put the
accelerator in the «SLOW» position for 20 sec-
onds before stopping the engine.
Always take out the ignition key if leaving the machine
unattended!
To keep the battery charged, do not leave the key in the
«ON» position when the engine is not running.
5.4.8 C
LEANING AND STORAGE
After each mowing, clean the outside of the machine.
Do not leave containers full of cut grass inside a room.
Clean the plastic parts of the body with a damp sponge using water and deter-
gent, taking care not to wet the engine, the electrical parts or the electronic card
located under the dashboard.
Never use hose-nozzles or harsh detergents for cleaning the
body and engine!
For washing the inside of the cutting deck the machine must be on firm ground
with:
– the stone-guardin place;
– the operator seated;
– the engine running;
– the transmission in neutral;
– the blades engaged.
IMPORTANT
왖
!
WARNING!
IMPORTANT
왖
!
WARNING!
왖
!
WARNING!
➤
1