Confidential Information
Dolby Vision CMU user manual
Page 9
Single-link 3G Level A/B Setup
2.3.1.1
SDI output
Use the following SDI configuration to connect using single-link 3G SDI. See Figure 4 for SDI connector
configuration.
SDI 1 = input from application
SDI 3 = output to target monitor
SDI 2, 4 = not used
2.3.1.2
HDMI output
Use the following HDMI configuration to connect using single-link 3G SDI. See Figure 4 for SDI
connector configuration.
HDMI = output to Dolby Vision television
SDI 1 = input from application
SDI 2, 3,4 = not used
Dual-link 1.5G HDSDI Setup
2.3.2.1
SDI output
Use the following SDI configuration to connect using dual-link 1.5G HDSDI. See Figure 4 for the SDI
connector configuration.
SDI 1 =
A
side of dual-link input from application
SDI 2 =
B
side of dual-link input from application
SDI 3 =
A
side of dual-link output to target monitor
SDI 4 =
B
side of dual-link output to target monitor
2.3.2.2
HDMI output
Use the following HDMI configuration to connect using dual-link 1.5G HDSDI. See Figure 4 for the SDI
connector configuration.
HDMI = output to Dolby Vision television
SDI 1 =
A
side of dual-link input from application
SDI 2 =
B
side of dual-link input from application
SDI 3, 4 = not used
