Dolby Laboratories Lake LP4D12, Manual

Page: 39 / 68

Dolby
®
Lake
®
Processor System Manual Front-Panel Interface
27
Figure 4-24 Partial Reset Confirmation Menu
Figure 4-25 Factory Reset Confirmation Menu
For a full factory reset, the module configuration after reset is based on the analog I/O
configuration. For example, if you have an LP4D12, the Contour loudspeaker
processor configuration is recalled. If you have an LP8D8, the Mesa EQ processor
configuration is recalled.
Press the
ME
button on the left Portal to confirm performing a factory reset, or press
the
ME
button on the right Portal to cancel the reset procedure.
4.5.10 Processor Reset Confirmation Display
Figure 4-26 Processor Reset Confirmation Display
The Processor reset confirmation display is shown when performing a full or partial
factory reset, as outlined in the previous sections.
The front panel will be restored to the output-channel Meter mode, displaying the
associated signal processing configuration upon completion of the reset procedure.