Dolby Laboratories Lake LP4D12, Manual

Page: 31 / 68

Dolby
®
Lake
®
Processor System Manual Front-Panel Interface
19
Figure 4-7 Physical Input Meters
Each physical input channel is represented across the Portal displays. Depending
upon the input channel configuration, these meters indicate the relevant digital or
analog type being used via the Portal text displays.
In physical-input channel view, pressing the
Mute Enable
button allows you to mute
any physical-input channel by pressing the corresponding channel identification
button.
Pressing the
Meter
button again toggles to the display module input meters, as shown
in Figure 4-8.
Figure 4-8 Module Input Meters
In module input view, the meters show the post-input mixer audio level for the input
of each processing module.
In module input view, pressing the
Mute Enable
button allows you to mute any
module input by pressing the corresponding channel identification button. This has
the same effect as pressing the
ME
button when in output metering view.
In any of the meter views, the
Menu
button enters the Main menu of Menu mode.
Menu mode is detailed in the following section.
4.5 Menu Mode
When the
Menu
button is pressed, the Portals display the Main menu, as shown in
Figure 4-10. Pressing the
ME
button navigates to the next menu down in the system.
Pressing the
Menu
button navigates to the next menu up in the system. Pressing the
Menu
button from the top-level Main menu exits Menu mode and the Portals return to
displaying metering information.