2. Click the
+
to open the
NTP
section.
3. Enter the server addresses provided by your local system administrator.
What to do next
For more information about configuring NTP, see the
Dolby Conference Phone Administrator's
Guide .
2.6 Proxy configuration
Some network configurations and phone software require that you specify a proxy server.
Note:
Depending on your network settings and phone software version, this procedure may
not be necessary. For a complete description of this functionality, see the
Dolby Conference
Phone Administrator's Guide .
The information listed in this table is required.
Attributes
Description
Proxy server address
IP address.
Proxy server credentials: User name
and password
If the proxy server requires devices to authenticate before
being allowed access, then a user name and password are
required.
In many cases, networks require clients to go through a proxy server to communicate with
Internet services. The phone supports the HTTP proxy in these scenarios:
Configuration procedures
Dolby Conference Phone version 4.1 Configuration Guide for iMeet
5 October 2018
14
