Model DP579 Dolby Tri-Level Sync Interface
v
Regulatory Notices and Fuse Information
FCC
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
this instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his or her own expense.
Canada
This Class A digital apparatus complies with Canadian ICES -003.
UL
WARNING: Troubleshooting must be performed by a trained
technician. Do not attempt to service this equipment
unless you are qualified to do so. Check that the correct
fuses have been installed. To reduce the risk of fire,
replace only with fuses of the same type and rating.
The ground terminal of the power plug is
connected directly to the chassis of the unit. For
continued protection against electric shock, a
correctly wired and grounded (earthed) three-pin
power outlet must be used. Do not use a ground-
lifting adapter and never cut the ground pin on the three-prong plug.
UK
The power cord Dolby part 92021 supplied for use in Europe is not suitable for use
in the UK. To use the cord in the UK cut off the CEE7/7 plug and replace with an
approved BS 1363 13A plug:
The core that is coloured green and yellow must be connected to the terminal in the plug
identified by the letter
E
or by the earth symbol
or coloured green or green and yellow.
MAIN
