Dolby Laboratories DP564, User Manual

Page: 38 / 101

DP564 Multichannel Audio Decoder Menus
4-12
4.4.3 User Presets
The DP564 stores up to 32 presets. Each preset includes all active settings. If you
recall a preset, then change one parameter, the configuration with the one changed
parameter is not stored unless you save it as a separate preset. Presets 29–32 are
reserved by the factory configurations shown in Table 4-2.
Note: The factory ships the DP564 with these same presets saved as presets 1–4,
respectively, so initially you can apply these presets by pressing the front-
panel
Preset
buttons. Presets 1–4 can be reset, of course, to suit your
requirements.
Table 4-2 Factory-Reserved Presets
Manual
Detection
Mode
Auto Detection
Mode
Lo/Ro
Downmix
Line Mode
Lt/Rt Downmix
Line Mode
Pro Logic
Decode
Preset Number
29 30 31 32
Preset Name
Manual Ctrl Auto Ctrl
Stereo
Dwnmx
Lt/Rt
Decode
Parameter Setting
Monitor Control–
Pro Logic
Manual Auto Manual Manual
Monitor Control–
Surround EX
Manual Auto Manual Manual
Pro Logic Decode
Off - Off On
Surround EX
Decode
Off - - -
Lo/Ro Downmix
Off Off On -
Lt/Rt Downmix
Off Off - On
Line Mode
Off Off On On
RF
Off Off - -
Custom
Off Off - -
The
User Preset
menu includes
Recall Preset
and
Save Preset
.
Recall Preset
You can recall any preset by entering the
Recall Preset
menu, scrolling to select
the preset you want to use, and pressing
Enter
.
You can recall preset 1, 2, 3, or 4 by pressing the appropriate front-panel
Preset
button. When you recall a preset, an activation message appears briefly in the middle
of the display, showing the preset name and number. When you use a front-panel
Preset
button to activate preset 1, 2, 3, or 4, the display remains on the menu you are