dol sensors iDOL 65, Manual, Page: 6 / 12

6 www.dol-sensors.com iDOL 65 Camera
6 Registration of location and calibration of camera
As a part of the installation it must be registered where each of the iDOL 65 cameras are mounted. A certified
DOL Omni Cloud administrator must have prepared the DOL Omni Cloud before this step in the installation.
Note that the camera must be connected to power and the network and must be online during this
process, i.e.
the green power LED is ON [
}
8] .
6.1 Login
Use the browser on your mobile phone and log into the DOL Omni Cloud as ‘Configurator’.
• Open the browser and find https://omni.dol-sensors.com
• Enter user name and password
6.2 Register the placement of the camera
• Navigate to the selected placement (pen) in FarmLayout.
• When the iDOL 65 for registration is selected, enter the DEVICE ID found on the label inside the iDOL 65
box.
• Then enter the KEY shown on the label.
• Press Save.
To the left: the screen where the iDOL 65 is searched for and found. To the right: iDOL 65 selected for setup.