Quick Reference Guide CMT-6 (v2)
DOKKi
.eu
ACCESSORIES
Please check our website for currently available accessories.
TROUBLESHOOTING
If you are experiencing any problem with the docking station the first thing to check is if the scanner functions correctly when connected
directly to the PC with an USB cable. Do so by plugging the USB cable that came with your scanner into your scanner and make sure the
other end of the USB cable goes directly into the PC (bypassing any present HUB).
If it does function properly continue at the checklist below, otherwise the problem is with your scanner itself, the USB cable or the PC
(USB port and/or driver(s)).
Checklist
No power *1
-
Is the scanner firmly pressed into the docking station?
-
Are the cables working and properly connected?
-
Is the PC switched on?
No communication *1
-
Is the scanner fully charged?
-
Are the necessary scanner drivers properly installed?
-
Do the communication settings match between scanner and the PC?
-
Are there no other programs polling on the same COM-port?
*1 and if connected to a
powered USB hub
-
Is the power-supply of the USB hub plugged in?
-
Is one port on the USB hub failing, or are all ports faulty?
-
Is the USB cable securely fitted on both ends?
If you have any questions regarding the use of the DOKKi.eu docking station please contact your dealer.
BY OPENING THE PACKAGE OF THIS PRODUCT YOU AGREE TO BECOME BOUND
BY THE LIABILITY AND WARRANTY CONDITIONS.
Limited Warranty, Liability and Disclaimers
This Limited Warranty and Disclaimer extends only to products purchased directly from DOKKi.eu or a DOKKi.eu Authorized Dealer as
stated on our website (
).
Under no circumstance JNC will be liable for any direct, indirect, incidental, special, consequential, punitive, or exemplary
damages, including but not limited to, damages for loss of profits, revenue, income, goodwill, use, data, or other intangible losses that
arise from use or inability to use the docking station, even if JNC has been informed about the possibility of such damages.
This DOKKi.eu docking station is warranted for a period of one year after purchase, covering defects in material and workmanship. JNC
will repair or, at its opinion, replace products that prove to be defective in material or workmanship under proper use during the
warranty period. The warranty does not apply to defects resulting from (a) improper or inadequate maintenance measures taken; (b)
interfacing parts or supplies not supplied or authorised by JNC; (c) unauthorized modification or misuse; (d) operation outside the
applicable environmental parameter limits specified for the product; or (e) improper site preparation or maintenance for installation.
Always return the product through the dealer where initially bought. Follow the instructions provided by your dealer.
DOKKi.eu is a trademark of JNC Service B.V. ('JNC'). Copyright JNC Service B.V. All rights reserved.
CMT-6 v2_QRG-002
