Strona 18 z 22
11.
Connection of the device and first run
Attention:
In order to connect a device to the network use appropriate power cord: British or European, depending on a
region.
A device has to be connected to the grounded network by using a special power cord.
Before connecting check condition of a cord as well as condition of cables, plugs and a socket. They cannot be
damaged.
Equipment can be connected in two ways. It depends how ones shall use it as a touch table or a wall screen.
Installation as a touch table:
a)
Connection of a power cord which is situated on a top part of a leg type A to the power socket situated on a
left side of a top table.
b)
Connection of a power cord which is situated on a top part of a leg type A to the cable which is attached to a
set.
c)
Connection of a power cord to the electricity network 230 V / 50 Hz.
d)
Set the power switch (it is situated on the surface of a top table, left side) to position 1 – ON.
Installtion as a wall screen:
a)
Connection of a power cord to the power socket which is situated on a left side of table top surface.
b)
Connection of a power cord to the electricity network 230 V / 50 Hz.
c)
Set the power switch (it is situated on the surface of a top table, left side) to position 1 – ON.
