DOIT.AM
®
ESP-F1 User Manual
Doctors of Intelligence & Technology (DOIT)(www.doit.am) Copyright@2014-2017Page
1
1. Introduction
The WiFi module ESP-F1 is manufactured by using a high-performance chip ESP8266EX. This small
chip is encapsulated an enhanced Tensilica’sL106 diamond series 32-bit kennel CPU with a SRAM.
Thus, ESP8266 has the complete function Wi-Fi function; it not only can be applied independently, but
can be used as a slaver working with other host CPU. When ESP8266 is applied as a slaver, it can start
from the onboard Flash. The built-in high-speed buffer is not only benefit to improve the system
performance, but optimize the store system. In addition, ESP8266 can be used as Wi-Fi adapter by
SPI/SDIO or I2C/UART interface, when it is applied to other MCU design.
The ESP-F1 module supports the standard IEEE802.11 b/g/n/e/i protocol and the complete TCP/IP
protocol stack. User can use it to add the WiFi function for the installed devices, and also can be viewed
as a independent network controller. Anyway, ESP-F module provides many probabilities with the best
price.
