4.2 Adjusting the Backrest
The Plinth is fitted with an adjustable angle backrest. If the backrest is adjusted
with a patient on the Plinth ensure they are capable of supporting themselves. If
this is not possible it may be necessary to seek assistance to enable the patient
to be supported whilst the backrest angle is adjusted.
• To raise the backrest:
Lift the operating lever and gently lift the backrest up to the desired angle.
Release the lever once the backrest is at the desired angle.
• To lower the backrest:
Lift the operating lever and gently push the backrest down to the desired angle.
Release the lever once the backrest is at the desired angle.
4. OPERATING THE PLINTH
WARNING!
• The backrest must not be used to raise the patient
• Always ensure the backrest is locked in position
• Do not sit on the backrest section
Lift
operating
lever
Fig 5: Adjusting the backrest
Raise/lower
to desired
angle
7
Summary of Contents for PLE01
Page 1: ...DOHERTY 2 3 Section Plinths User Instructions www sidhil com ...
Page 2: ......
Page 19: ...17 ...
