Testing the Vibration Setting:
• Start in the 'off' position ('0').
• Turn the dial to the ‘V’(vibrate) position.
• Gently press on the pressure sensor under the
collar strap and then begin to increase the pressure.
• As you increase the pressure on the sensor, the
vibration will intensify.
Testing the Stimulation Setting:
• Start in the 'off' position ('0').
• Turn the dial to the ‘3’ (high) position.
• Place the test light on the contact posts.
• Gently press on the pressure sensor under the
collar strap and then begin to increase the pressure.
• The test light on the
Multi-Tool should illuminate
and get brighter as you
increase the pressure.
7
TESTING THE SIDEWALKER
Multi-Tool with Test Light
Reminder: The Pressure Sensor will not activate for 10 seconds after
turning 'on' the SideWalker.
1
1
2
2
3
3
1
