20
TESTING YOUR DOGTRA e-Fence System
1. Activate the Dogtra e-Fence, place the accessory magnetic switch (located on the
top of the wall mount transmitter) to the red dot on the collar/receiver. Hold them
together for a moment until the LED indicator light starts flashing on the receiver.
The indicator light will blink once every two seconds showing that the unit is
charged and ready to use.
(If the red indicator light emits a double blink every two seconds, the batteries need
to be charged.)
2. Place the test light on the contact points on the receiver and hold it there.
3. The collar receiver should be held at the height of the dog
’
s neck with the contact
points pointed upward. Walk slowly toward the boundary wire. Be careful not to
touch the contact points.
4. Watch for the test light to come on.
Summary of Contents for e-Fence
Page 1: ...OWNER S MANUAL ...
Page 2: ...2 CONTENTS ...
