17
16
14. Code Setting
* You can code up to eight receivers to one transmitter
The transmitter has a code for each button. In order to add another receiver,
you will need to code the new receiver to the transmitter.
1) Make sure that the receiver is off.
2) Press and hold down the on/off button on top of the receiver for 5 seconds.
3) The LED indicator on the receiver will rapidly blink green. You can release
your finger from the button.
4) Press the number on the transmitter that you would like to code the
receiver to. You may check that it is properly coded by pressing the button
on the transmitter, which will activate the LED indicator light on the receiver
at the same time.
Warning!
Do not use any other transmitter before programming a new receiver. The
receiver can accidentally code to another transmitter if used at the same
time. If this happens, you will need to recode the receiver to the correct
transmitter.
GENERAL TRAINING TIPS
Getting Started With Your BALL TRAINER PRO
Your dog must know some basic obedience commands before beginning
training with the BALL TRAINER PRO. A dog learns by first being shown a
command, followed by lots of repetition over an extended period. As the dog
becomes proficient at these commands, the trainer can introduce distractions
and different locations to strengthen them.
For more training information, please visit our website at
www.dogtra.com.
MAINTENANCE
Basic Maintenance
After each training session, carefully inspect the unit for any missing parts or
damage to the casing. Damaged or broken casing may affect the unit. After
confirming that there is no damage to the casing, clean off any dirt or debris.
Storage Maintenance
The transmitter battery should be taken out before storing the unit for
extended periods of time. The receiver battery should be fully charged before
storing for extended periods. While in storage, the receiver should be given
a full charge once a month and before the first use. Store the units in room
temperature. Do not keep the units exposed to extreme climates.
Troubleshooting
If the unit is malfunctioning, please refer to the “Troubleshooting Guide”
before sending it to Dogtra for service. If you have any questions or concerns,
you may email them to [email protected], or call customer service
at 1-888-811-9111.
FCC WARNING
The BALL TRAINER PRO complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
This is a sensitive radio device. Any unauthorized changes or modifications to
this device that are not expressly approved by Dogtra will void the warranty,
and may void the user's authority to operate the equipment.
Please do not tamper or modify the unit.
