56
57
The 2600T&B series is expandable, it can be used with
one or two collars. The transmitter has a toggle switch
located above the Nick button. This toggle switch allows
for selection of the orange or the green collar.
Set the toggle switch on the green position to select the
green collar and the orange position to select the orange
collar. The stimulation (Nick and Constant) along with
the beeper and Locate modes will only operate when
the toggle is in the desired position for the appropriate
receiver/collar.
Dog Collar
Toggle Switch
When you press the Mode button the first time, the collar
will beep twice. The beeper unit will always start in Run/
Point mode. The beeper will sound every 7 seconds while
the dog is running, and every 2 seconds when the dog
is on point or becomes stationary. The second time you
push the Mode button, it will beep once and remain silent
while the dog is running and beep every 2 seconds when
the dog is on point or stationary.
To turn the beeper unit off, press the Mode button a third
time. The unit will emit three rapid beeps, and the beeper
will turn off. The Locate mode can still be used!
Note:
The Locate button can be used in any mode you
are in.
3. BEEPER SOUND
Initial Beeper
Sound
Mode
Action
Press
1st Time
2 Beeps
Run/Point
Mode
- Dog running/moving: emits
double beep every 7 seconds
- Dog stationary/pointing: emits
double beep every 2 seconds
Press
2nd Time
1 Beep
Point-Only
Mode
- Dog running/moving: silent
- Dog stationary/pointing: emits
double beep every 2 seconds
Press
3rd Time
3 Beeps
No Beeper
Mode
No sound
Summary of Contents for 2600T&B
Page 1: ......
