28
1. To turn on the receiver, place the red dot on the back
of the transmitter to the red dot on the receiver. Hold
the two red dots together for a moment until the LED
light on the receiver comes on. The indicator light will
come on for a moment then blink once every 4 seconds,
showing that the receiver is ready to use (the receiver
needs to be charged if the indicator light is red). The
receiver will emit a melody when turned on.
2. Turn the transmitter on by pressing the black button
on the right side of the transmitter until the LCD screen
illuminates. The LED will blink every 4 seconds and the
LCD screen will show the remaining battery life (the
transmitter needs to be charged if there is only 1 bar
showing on the battery icon for the LCD transmitter
screen).
3. Place the test light, included in the package contents,
on the contact points as shown in the diagram.
4. Watch the test light as you push the Nick button on the
transmitter. It should light up for just a moment. The
higher the intensity, the brighter the test light will be.
5. Watch the test light as you push the Constant button on
TESTING YOUR 2500T&B
