72
BATTERY CHARGER
The battery charger and charging cables
allow you to charge both the transmitter and
receiver at the same time. The battery charger is
designed for a 220-volt wall outlet. (U.S.A. 110-
volt AC chargers and 12-volt field charger for
Lithium-Polymer batteries for your automobile
are also available.)
To use the battery charger for the two-dog
unit, combine both sets of battery charging
(splitter) cables as shown. This enables you to
charge the transmitter and both receivers at the
same time.
NOTE : Only use Dogtra-approved Lithium-
Polymer Battery Chargers for your Dogtra
e-collar. This will prevent any damage that
can be incurred from attempting to use a
different charger.
BATTERY CHARGER
Charging Cable
220 volt
Charger
Wall Outlet
Two-dog unit only
73
TESTING
1. To activate the
,
place the red dot on the back of the
transmitter to the red dot on the collar
receiver. Hold the two red dots together for
a moment until the green color LED
indicator light comes on.
The collar/receiver emits the Power-on
melody and turns on.
2. Place the Test light included in the package
contents on the contact points as shown in
the diagram.
TESTING YOUR
COLLAR
